Microphone Curly Cords – Pro Audio

PRO Audio Microphone Curly Cords

These cords use super stranded conductors (105 strands .08mm – 0.5mmΒ²) with a spiral lapp screen, and very nice robust Black Polyurethane sheath. 5mm OD. 21mm Nominal Coil Diameter.
Terminated with XLR Male and Female Connectors.
Coiled and Terminated here in Australia.

These cords are made on demand. Typically 1-2 week lead time.

PRO-XLRM-XLRF-300-150-T Approx 300mm with 150mm tails.
Extends to approx 1.5m
PRO-XLRM-XLRF-500-150-T Approx 500mm with 150mm tails.
Extends to approx 2.5m
PRO-XLRM-XLRF-1000-150-T Approx 1000mm with 150mm tails.
Extends to approx 5m
PRO-XLRM-XLRF-1800-150-T Approx 1800mm with 150mm tails.
Extends to approx 9m

 

Many other connector types are available.

 

Note:PROCONNECT Pty Ltd have make a very large range of both curly and straight AV cords, as well as bulk Audio/Video cable and connectors.

Please email sales@proconnect.com.au for prices.

12 thoughts on “Microphone Curly Cords – Pro Audio

  1. Wayne Riley says:

    Hi; My name is Wayne. I am a recordist based in Beijing, China.

    I would like to buy two of these types of cables please:

    Please could you let me know if you have any in stock or if you can provide me with something very similar?

    Thank you and best wishes.

    Wayne

  2. Dave Chapman says:

    Hi Can you Help
    I would like to buy a black curly low noise 2 or 4 core screened Cable that I can solder my own XLR plugs on to and use as a mic cable. I need it to be about 1 or 2 meter when at rest or longer and pull out to 3 or 4 meters when stretched or longer. Can you let me know if you have this sort of cable with a suitable diameter to go into XLR plugs and how much you charge for the cable plus postage. Many thanks Dave Chapman

    • Paul Scott says:

      Hi Dave,
      Thanks for your comment/inquiry.
      Yes, you can certainly get your cords here. Including cords for microphones. Including XLR connectors.
      Those lengths are no problem. (You can get up to 1.8m compressed)
      Standard microphone is twisted pair with an overall screen. We do these in a couple of sizes.
      I’ll email you a quote next…
      All the best…
      Paul.

      • John McClary says:

        Wow Paul,
        that cord is exactly what I’m looking for too as the inner XLR for a 3.7 meter boom pole (1.06m when retracted). However, even slow shipping to the US could be a bit so… could you give me a quote too? Thanks!
        John

  3. Exposito Stephane says:

    HI, I would like to buy a black curly low noise 2 pairs of 2 core screened audio cable soldered on 5 pin XLR plugs.
    This cable will be about 1 meter when at rest and pull out to 5/6 meters when stretched or longer.
    Can you let me know if you have this sort of cable with a suitable diameter to go into Neutrik XLR plugs and how much you charge for the cable plus shipping to europe.
    Many thanks Stephane Exposito

    • Paul Scott says:

      Hi Stephane,
      I have a 4 core overall screened cable that makes lovely curly cords.
      I’ll cost them up for you, and shoot you an email next.
      Best regards
      Paul.

  4. Les Bolen says:

    Hello Paul,

    Looking for two curly mic cord 1.5m at rest, XLR-M to XLR-F. Double checking that extended that should expand to around 22 feet if I’ve read above correctly?

    Thank you,
    Les

    • Paul Scott says:

      Sorry…I’m a metric person. πŸ™‚
      The extended length varies depending on the specific cable we use, and the diameter of the coil
      Are you saying you want the cords to extend to 6.6m?

      Paul.

Leave a Reply to Paul Scott Cancel reply

Your email address will not be published. Required fields are marked *