We manufacture and supply a large range of cords that are used in the road construction field.
Typically road pavers, profilers etc.
We have Sensor cords, Power Cords, Wheel Cords. etc. etc..
We use a variety of our curly cords (as well as straight cable as required)
These cords can all be supplied terminated as well.
3 Pin, 4 pin, 5 pin, 7 pin , 10 pin, 24 pin etc.
Many of our other multi core cables are also used in these applications.
Please email Sales@PROCONNECT.com.au with the details of your inquiry.
SONY DSC
can i please have a price and availbility on your 7core road/paver curly cord thanks
4m preferably.
Hi Adam,
Thanks for your inquiry.
I just emailed you the quote.
All the best…
Paul.
Need to replace a GPS 4 core cable with a curly cord as the current cable is prone to crushing on the tilt bucket of an excavator. Needs to be 500mm and extent to 2mtr approx.
Hi Joe,
I’ll shoot you a quick email next…
4 core cable is in a sleeve made of hydraulic line which gets crushed and fails red;white;black;green wires are 4mm needs to be as short as possible.and extends to 2.6 mtr
Hi Joe,
We might be able to do something.
I’ll check, and shoot you an email.
Hey after a number to get incontact with
Hi Jordan,
Thanks for contacting me.
I’m not always near the phone, so we basically operate via email.
If you could let me know what your after, I’ll see if we can help.
or if you drop me your phone number, I’ll call you tomorrow.
Best regards
Paul.
Hi Paul
After 2 x 4.meter 4 wire cores could you give price and availability
Thank you Trent
Hi Trent,
I’ll be able to help.
But will need a bit more info please.
Is it for a paver?
If so…which one, and what type? power, sensor, pendant controller signal cord, etc etc
What sort of size?
Can I help you with the connectors as well? (we do a large variety of different plugs and fittings)
When you say 4m…I assume you mean when it’s extended?
Please feel free to email me pictures etc to Sales@PROCONNECT.com.au
Best regards
Paul.
Hi I’m after a price on two curly cords with amphenol 10 pin connectors on each end the connectors have female contacts it’s on an old Blaw Knox paver i have photos I can send
Hi Andrew,
We should be able to help with this.
Yes please email me your pictures.
Sales@PROCONNECT.com.au
Thanks
Paul.
Thanks
Paul.
Paul
I’m after a price on a 10 core curly cable either 1mm or 0.75 is fine.
It’s only used for 12volt applications.
Hi William,
No Worries.
How long would it need to be?
(*when measured in either the compressed state, or when extended)
We normally put 150mm straight tails each end. unless you need special tail lenghts?
And…do you need connectors? we do quite a variety of them.
May I ask…where this cord is being used?