Microphone Curly Cords – Multi Core

4 Core individually screened curly cords

High Quality Retractable cords for use with Microphones.

We manufacture and supply a large range of microphone style cords, which are suitable for a variety of professional, commercial and industrial uses.

Including fist microphones, handsets and headsets.

Standard straight tail length is 150mm

Series Part Number Number of Cores Core Size Screen O.D. Compressed Coil Lengths Max Extension Ratio
PRO-2C0.1IS-PU 2 21/.08bc Individually screened cores 5 300/500/1000/1800 4:1
PRO-4C0.1IS-PU 4 19/.08bc Individually screened cores 4 300/500/1000/1800 6:1
PRO-1TP+2C0.14SCN-PU 4 7/.16TC Overall Foil and Spiral Lapp 4.4 300/500/1000/1800 4:1
PRO-8C0.09FSCN-PU 8 19/.08tc Overall Foil & Drain Wire 4 300/500/1000/1800 5:1
PRO-8C0.1FSCN-PU 8 21/.08bc Overall Foil & Drain Wire 5.6 300/500/1000/1800 5:1
PRO-12C0.08FSCN-PU 12 21/.08tc Overall Foil & Drain Wire 6.2 100/300/500/1000/1800 4:1

Other Lengths on request.8 Core Screened Curly Cords 8 core screened curly cord

The special construction of these cords is most desirable as it makes the cords flexible, yet hard wearing.

In particular these cords all have a special Polyurethane Jacket which makes them all Water Resistant, UV Stable, Cut & Abrasion Resistant, and offer Good Chemical resistance against Oils, Grease and Fuels. etc.

We Supply the cords both unterminated and can also arrange for termination, using a variety of connector types.

We are able to supply many connector types to suit.

Including Nexus AP-117BRXL AJ-117BRXL, Nexus TP120 and TJ101

 

50 thoughts on “Microphone Curly Cords – Multi Core

  1. James Lance says:

    Hi,
    I am interested in your 4 core microphone 1800mm shielded curly cord, unterminated.

    Can I please get a price for 1, and postage to Australia 3095.

    Cheers

    James

  2. Roger Cordukes says:

    Hi,
    Can you please give me a quote on a 4 core curly microphone cord? Postage to Kelso, Qld, 4810.

    • Paul Scott says:

      Hi Alun,
      Thanks for your comment/inquiry.
      We make a couple of different 4 core curly cords.
      Do you know if you want the cable screened? overall? or each core?
      It might help me point you in the right direction if you could tell me what the cord is used in/on ?
      also…just need to confirm 1.5m when compressed or extended?

      All the best…
      Paul.

    • Paul Scott says:

      Hi Jason,
      Thanks for your email.
      I only have a few of these left.
      I’ll see exactly what I have, and send you an email shortly.
      All the best…
      Paul.

  3. Hans Impink says:

    I am interested in a quote for four (4) curly leads of the following spec

    Color black, OD 4.0mm, closed 250mm, open 1000mm, 3 core Red Black yellow/screen, colors are not so important. This is to replace GME handheld UHF microphone leads which have perished over the years due to UV and handling. I have some photos which I can forward.

  4. Ian Thompson says:

    Hi,

    I am looking for a replacement curly cable for my marrine VHF set.  It is black, around 400mm long and 5mm dia.  The microhpone has 4 control buttons on it.  I have not yet stripped the set to see how many cores are in the existing cable but thought that you may know what is used for these applications.

    If you can supply, can you advise a cost?

     

    Many thanks, Ian

    • Paul Scott says:

      Hi Ian,

      We can probably help you, but the number of cores and screening requirements do vary.

      It would be best if you could examine the existing cord, and report back.

       

      Best regards

      Paul.

  5. Stephen Keddie says:

    Regarding the PRO-1C0.1-SCN+6C0.1-PU, Single core screened + 6 unscreened, O.D. 4.8.

    Is the coil length of 1800 quoted above the “coiled retracted” length or the maximum extended length?

    What I am after is a cable of this type that retracts to around 2 meters, but can extend up to around 7 meters. And what would be the cost of such a cable?

    regards,

    Steve

    • Paul Scott says:

      Hi Steve,
      Yes…that is 1800mm coil when compressed.
      In that particular cable, that would extend to a max of 10.8m plus tails, so 11.1m total.
      I’ll shoot you a quote via email next.
      All the best…
      Paul.

  6. colin says:

    Hi,

    I need a replacement curly mic cable, 4 core one core screened.

    Its for a marine UHF (GME GX600) but GME have cunningly hard wired the mic, so I will cut and re-solder the lead. So it doesnt matter what the lead is, so long as its curly (standard CB type arrangement) and 4 core + 1 shield. PReferably white, but not essential.

    POstage to 2077 please,

    thanks

    COlin

  7. Kevin says:

    looking for curly cord to replace mic cord on GME TX 3200 .. telephone plug on radio end .. I'm happy to solder connections to mic end … post to NSW Australia

  8. John Carter says:

    I am looking for a replacement curly cord for a GME mic MC509B for TX4400. It a 5 core lead with the telephone plug on the end

  9. Paul Scott says:

    Hi Mike,
    I don’t have the records on that one handy.
    I suspect it may have a single core with a screen on it (the mic line), plus a number of additional cores. (maybe 6)
    But I would need to to confirm for me please.

    Best regards
    Paul.

    • Claeten says:

      Hi Paul,

      I am in the same boat as the other 2 fellas above. I can confirm that the curly cord has 1 screened core and additional 6 unscreened cores. It does also have an overall foil aswell.
      Can you look into an option and let us know please?

      Thanks
      Claeten

  10. Hans de Waard says:

    Paul , I have a GME GX 700 W ,curly cord u/s as others have mentioned, [ not uv stabilised ] , used to be white ,now light brown and frayed with covering coming off , after only 16 months .
    Instruments including radio always covered except for boat use days , GME don’t want to know .
    Only need original length , according to GME has plug ins at both ends .
    What have you got that is better quality?
    If you need more info let me know .
    Regards Hans

  11. andy says:

    Can you please give me a quote on a 6 core curly microphone cord? 50m and 100m or whatever bulk lengths you offer ….Delivery to Melbourne

    • Paul Scott says:

      Hi Andy,
      Sorry…the curly cords don’t come like that. (i.e. on rolls….like straight cable)
      Rather each cord is individually coiled.
      The “standard” coil lengths we do are typically 300/500/1000/1800mm -when measured in the compressed state.
      And each cord typically includes straight tails on each end to facilitate termination. (typically 150mm)

      What lengths are you using? can we help with the connectors as well?

  12. Charlie says:

    Hi I have a navman VHF 7200 and the cord had been completely destroyed and was wondering if one of these cords would work for it

  13. Shaun Tolhoek says:

    Hi, Similar to the comment above. I have a VHF 7000 with a destroyed curly cord. Do you have something that would suit?

  14. John Conroy says:

    Hi Paul,
    I have a Oricom uhf380 radio that has a perished curly cord on the hand piece that I would like to replace.
    It has 8 cores is 5mm in diameter has tails at 150mm and the curly cord is 240 mm long.
    On one end it has an 8 pin data plug.
    Could you supply me a quote with freight to Cairns for a cable with plug that would suit.
    Regards,
    John

  15. Ian Brown says:

    Hi Guys;
    Chasing a replacement cable for our microphone, on our Navman VHF 7000.
    The unit still works fine but cable has deteriorated and collapsed.
    8 core, foil wrapped & cotton drain.
    Stretched out the cable is about 2m long & Measures 4.8mm OD & each internal cable measures ~1mm OD

    Is your cable: PRO-8C0.09FSCN-PU Best or the PRO-8C0.1FSCN-PU more suitable?

    Thanks in advance for your help

    Ian Brown

  16. Greg Weekes says:

    Hi Guys
    As per Ian Brown’s enquiry I am also looking for a replacement cord on my VHF 7000. It’s 8 core and 2mtrs long when extended. Hoping you could assist with a replacement

    Thanks in advance
    Greg Weekes

  17. Ian Skews says:

    Hi Paul , chasing a curly cord for a Navman VHF 7200, 300mm would be fine, it’s a bench radio
    Thanks Ian

  18. Ian White says:

    HI Chasing a NAVMAN 7010 remote handpiece cord which has perished, has a 8 pin right angled plug for the remote flybridge connection

    • Paul Scott says:

      Hi Ian,
      last time I looked into this, I could get the 8 pin connector in a straight version only. Not a right angle type.
      Could you use this?
      The other problem is we can’t do the molded grommet that goes into the mic end.

  19. Dennis Stanley says:

    i’d like a price on a 500mm long one of these as a vhf radio mike cord replacement.
    PRO-1C0.1-SCN+6C0.1-PU. i’m in cairns aust.

  20. Tim says:

    Hi Paul,
    Are you able to supply a “HM-182” style CB microphone cord assembly? It would be for an ICOM IC-440 radio. The existing cable functions fine but the insulation is deteriorating.

    • Paul Scott says:

      Hi Tim,
      I believe that would be an 8 core cord, with an RJ45 connector on the end, and I think a JST Header plug for inside the microphone.
      We can probably help with the curly cord itself and the connectors, but we don’t have the molded grommets.

Leave a Reply

Your email address will not be published. Required fields are marked *